Opel Omega B - the Repair manual and operation
1. Maintenance instruction
2. Maintenance
3. Repair of engines
3.1. SOHC engines of 2,0 liters
3.2. DOHC engines of 2,0 liters
3.2.1. Technical characteristics
3.2.2. Check of a compression
3.2.3. Top Dead Point (TDP) of the N1 piston
3.2.4. Cover of camshafts
3.2.5. Pulley of a bent shaft
3.2.6. Covers of a gas-distributing belt
3.2.7. Gas-distributing belt
3.2.8. Natyazhitel of a belt, asterisks and intermediate pulleys
3.2.9. Epiploons of camshafts
3.2.10. Camshafts and pushers
3.2.11. Head of cylinders
3.2.12. Oil pallet
3.2.13. Oil pump
3.2.14. System of an equilibration of a bent shaft (engines since 1998)
3.2.15. Flywheel
3.2.16. Epiploons of a bent shaft
3.2.17. Fastenings of the engine and transmission
3.3. 2,5 and 3,0 liters engines
3.4. Partition of all petrol engines
3.5. 2,0 liters diesel engine
3.6. 2,5 liters diesel six-cylinder engine
4. Heating system and ventilation
5. Fuel, exhaust systems
6. System of start of the engine
7. System of ignition
8. Coupling
9. Transmissions
10. Main transfer, half shafts
11. Brake system
12. Suspension bracket and steering
13. Body
14. Body electric equipment
3.2.9. Epiploons of camshafts
Replacement
PERFORMANCE ORDER
1.
Remove a camshaft asterisk.
2.
Drill two small openings in an old epiploon, screw in in them screws and take an epiploon.
3.
Clean a groove of an epiploon and remove agnails.
4.
Oil a new epiploon and establish it into place.