3.2.15. Flywheel
Removal
MECHANICAL TRANSMISSION
| PERFORMANCE ORDER |
| 1. Remove the transmission and coupling. |
|
|
2. Stop a flywheel and note its correct adjusting arrangement. |
| 3. Unscrew bolts and remove a flywheel. |
|
AUTOMATIC TRANSMISSION
| PERFORMANCE ORDER |
| 1. Remove the transmission. |
| 2. Stop a drive plate and weaken its bolts. |
| 3. Completely unscrew bolts and remove a drive plate. |
|
Check
| PERFORMANCE ORDER |
| Check a flywheel for existence of wear and damages. At detection of those, address the expert. |
|
Installation
MECHANICAL TRANSMISSION
| PERFORMANCE ORDER |
| 1. Clean the joined surfaces of a flywheel and a bent shaft. Clean carvings of bolts. |
|
|
| 2. Establish a flywheel, insert and tighten bolts (the drawing at the left), tighten bolts in addition on a necessary corner (the drawing on the right) (see subsection 3.2.1) |
| 3. Establish coupling and the transmission. |
|
AUTOMATIC TRANSMISSION
| PERFORMANCE ORDER |
| 1. Clean the joined surfaces of a drive plate and a bent shaft. Clean carvings of bolts. |
| 2. Establish a drive plate and tighten bolts. |
|
