3.2. DOHC engines of 2,0 liters
In models it is established four-cylinder line with the water cooling and two camshafts located in the top part of the engine.
- 1. Maintenance instruction
- 2. Maintenance
- 3. Repair of engines
- 3.1. SOHC engines of 2,0 liters
- 3.2. DOHC engines of 2,0 liters
- 3.2.1. Technical characteristics
- 3.2.2. Check of a compression
- 3.2.3. Top Dead Point (TDP) of the N1 piston
- 3.2.4. Cover of camshafts
- 3.2.5. Pulley of a bent shaft
- 3.2.6. Covers of a gas-distributing belt
- 3.2.7. Gas-distributing belt
- 3.2.8. Natyazhitel of a belt, asterisks and intermediate pulleys
- 3.2.9. Epiploons of camshafts
- 3.2.10. Camshafts and pushers
- 3.2.11. Head of cylinders
- 3.2.12. Oil pallet
- 3.2.13. Oil pump
- 3.2.14. System of an equilibration of a bent shaft (engines since 1998)
- 3.2.15. Flywheel
- 3.2.16. Epiploons of a bent shaft
- 3.2.17. Fastenings of the engine and transmission
- 3.3. 2,5 and 3,0 liters engines
- 3.4. Partition of all petrol engines
- 3.5. 2,0 liters diesel engine
- 3.6. 2,5 liters diesel six-cylinder engine
- 4. Heating system and ventilation
- 5. Fuel, exhaust systems
- 6. System of start of the engine
- 7. System of ignition
- 8. Coupling
- 9. Transmissions
- 10. Main transfer, half shafts
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Body electric equipment
