3.2.7. Gas-distributing belt
Removal
PERFORMANCE ORDER |
1. Disconnect a wire of the minus plug of the accumulator and install the N1 piston in VMT. |
2. Remove a pulley of a bent shaft. |
|
3. Weaken a bolt (1) of a natyazhitel of a gas-distributing belt, turn the lever (2) natyazhitel clockwise against the stop and tighten a bolt. |
4. Take off a gas-distributing belt and note its direction of rotation. |
5. Carefully examine a belt on existence of wear and damages, if necessary replace it. |
|
Installation
Combination of synchronizing tags
|
1. Tags of asterisks of camshafts
2. Tags on covers of bearings
3. Combination of a tag of an asterisk of a bent shaft with a cut in a casing of the oil pump |
Arrangement of the index of a natyazhitel concerning a cut in a back plate
1. Index of a natyazhitel 2. A cut in a back plate A. A new belt, a natyazhitel without tags
|
B. A new belt, a natyazhitel with tags C. An old belt, a natyazhitel without tags D. An old belt, a natyazhitel with tags |
PERFORMANCE ORDER |
1. Carefully clean asterisks of cranked and distributive shaft. Check combination of tags of asterisks of camshafts with tags on covers of bearings, combination of a tag of an asterisk of a bent shaft with a cut in a casing of the oil pump (see rice. Combination of synchronizing tags). |
2. Put on a belt asterisks. |
|
3. Weaken a bolt of a natyazhitel and turn the lever of a natyazhitel counterclockwise against the stop. Tighten a bolt of a natyazhitel. |
4. Check whether synchronizing tags are combined. |
5. Turn a bent shaft on two whole revolutions. |
6. Check tags and again weaken a bolt of a natyazhitel. |
7. If you established a new gas-distributing belt, adjust a natyazhitel so that his index was directed to a cut or to a tag of "NEW" (see rice. An arrangement of the index of a natyazhitel concerning a cut in a back plate) also tighten a bolt. |
8. If you established an old belt, the index of a natyazhitel has to be directed to 4 mm more to the left of a cut or has to indicate a tag of "USED" (see rice. An arrangement of the index of a natyazhitel concerning a cut in a back plate). |
9. Establish the remained details. |
|