5.1.17.4. Elements of system of collecting vapors of fuel
COAL FILTER
Removal and installation
| PERFORMANCE ORDER |
| 1. Remove the right forward wheel. |
|
2. Turn off fixing nuts and squeeze out pins. |
|
3. Remove external parts of fastenings. |
|
4. Remove an insert of a wheel niche of the right forward wheel.
|
|
5. Turn off a fixing nut. |
|
6. Remove the coal filter (it is specified by an arrow) from fastenings. Mark and disconnect hoses. |
| 7. Installation is carried out to the sequences, the return to removal. |
|
BLOWING-OFF VALVE
Valve arrangement on l engines 2,5 and 3,0
|
|
On the 2,5 and 3,0 l engines the blowing-off valve (it is specified by an arrow) is located behind a head of the block of cylinders. |
Removal and installation
| PERFORMANCE ORDER |
| SOHC engine of 2,0 l |
| 1. Disconnect the socket of connection of the valve. |
| 2. Disconnect hoses from the valve, turn off fixing screws and remove the valve. |
| 3. Installation is carried out to the sequences, the return to removal. |
| DOHC engine of 2,0 l |
| 4. Disconnect the socket of connection of the valve. |
| 5. Turn off fixing screws and remove the valve together with a fixing arm from a head of the block of cylinders. |
| 6. Mark and disconnect vacuum hoses. |
| 7. Installation is carried out to the sequences, the return to removal. |
| 2,5 and 3,0 l engines |
| 8. Remove the top section of an inlet collector. |
| 9. Turn off a fixing bolt of the valve, disconnect the socket of connection and hoses. |
| 10. Installation is carried out to the sequences, the return to removal. |
|
