11:13. Hydraulic tubes and hoses

Removal and installation

1. Remove a tank cap with brake fluid and close a mouth a polyethylene film.
2. Lift the car and install it on support.
Forward flexible hose
3. Remove a forward wheel.
4. Turn off a bolt of connection and disconnect a hose from a support.
5. Remove a hose from fastenings.
6. Turn off a nut of connection with a brake tube and remove a hose.
Back flexible hose
7. Remove a hose from fastenings.
8. Turn off nuts of connections with brake tubes and remove a hose.
Brake tubes
9. Turn off fixing nuts of connections and remove a hose from fastenings.
10. Installation is carried out to the sequences, the return to removal.