11.1. Technical characteristics
System type |
Lobbies and back disk brakes, mobile forward supports, the fixed back supports, double hydraulic contour, the vacuum amplifier. ABS system. The Trosikovy drive of the emergency brake on back wheels.
|
Diameter of the vacuum amplifier |
200/255 mm
|
Length of a rod of the piston of the vacuum amplifier |
106 ± 0,5 mm
|
Amount of brake fluid |
0,5 l
|
The brake pedal course before inclusion of fires of a stoplight |
155 mm
|
Main brake cylinder, diameter | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
23,81/20,64 mm
|
• models with the 6-cylinder engine |
25,40/20,64 mm
|
– models since 1998 of release: | |
• all models |
25,40 mm
|
Forward brakes | |
Diameter of a brake disk: | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
286 mm
|
• models with the 6-cylinder engine |
296 mm
|
– models since 1998 of release: | |
• all models |
296 mm
|
Thickness of a new brake disk: | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
24 mm
|
• models with the 6-cylinder engine |
28 mm
|
– models since 1998 of release: | |
• all models |
28 mm
|
The minimum thickness of a brake disk after processing: | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
22,5 mm
|
• models with the 6-cylinder engine |
26,5 mm
|
– models since 1998 of release: | |
• all models |
26,5 mm
|
Minimum admissible thickness of a brake disk: | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
21 mm
|
• models with the 6-cylinder engine |
25 mm
|
– models since 1998 of release: | |
• all models |
25 mm
|
The maximum difference in disk thickness |
0,01 mm
|
The most admissible beating of a disk |
0,12 mm
|
The most admissible depth of scratches |
0,4 mm
|
Thickness of brake slips: | |
– new |
17,50,6 mm
|
– wear limit |
8,0 mm
|
Diameter of the piston of a support: | |
– models till 1998 of release: | |
• models with the 4-cylinder engine |
54 mm
|
• models with the 6-cylinder engine |
54 mm
|
– models since 1998 of release: | |
• all models |
57 mm
|
Back brakes | |
Diameter of a brake disk (new) |
286 mm
|
Thickness of a brake disk: | |
– new |
12,0 mm
|
– a minimum (after processing) |
11,0 mm
|
Wear limit |
10,0 mm
|
The most admissible difference in disk thickness |
0,01 mm
|
The most admissible beating |
0,12 mm
|
Diameter of the piston of a support |
40,0 mm
|
Thickness of brake slips: | |
– new |
17,0 mm
|
– wear limit |
6,0 mm
|
Minimum admissible thickness of frictional material of brake shoes of the emergency brake |
1,0 mm
|
Diameter of the brake drum of the emergency brake: | |
– new |
160,0 mm
|
– wear limit |
161,0 mm
|
Moments of an inhaling, N. of m.
Fastening of an electronic control unit of ABS to the modulator |
8
|
Fastening of the ABS modulator to a body |
10
|
Fixing nuts of the modulator |
8
|
Fixing screws of the ABS sensor |
8
|
Lock screw of a brake disk |
4
|
Nuts / bolts of connections of brake tubes |
16
|
Fastening of an arm of a pedal of a brake to a body |
20
|
Fastening of an axis of a pedal of a brake |
18
|
Pumping valve |
9
|
Bolt of connection of a brake hose on a support |
40
|
Support fingers |
30
|
Bolts of fastening of a fixing arm of a support to a rotary pin: * | |
– stage 1 |
95
|
– stage 2 |
Tighten on 30 – 45 °
|
Lever of the emergency brake |
20
|
Forward fastening of the main brake cylinder |
22
|
Fastening of the main brake cylinder to the vacuum amplifier |
22
|
Fixing bolts of a support of a back brake |
80
|
Bolts of fastening of wheels |
110
|
Fastening of the vacuum amplifier |
21
|
* Use new bolts.