11:14. Vacuum hose and valve of the vacuum amplifier of brakes


1. Turn off a nut of connection of a hose on an inlet collector.
2. Remove a connecting knee from the vacuum amplifier.
3. Remove a hose from fastenings.
4. Cut off a hose from the valve, a connecting knee and connection of an inlet collector.
5. Cut off a new hose of the required length and connect it to the valve, a knee and connection of an inlet collector by means of collars.
6. Implant a connecting knee into the rubber plug on the vacuum amplifier and tighten a connection nut on an inlet collector. Establish new fastenings of a hose.