5.3.11. Inlet collector
Inlet collector
|
|
1. Consolidation
2. Inlet collector
3. Thermometer
4. Consolidation
5. Backpressure valve |
The inlet collector has to be dismantled, for example, during the works with system of injection.
Removal
| PERFORMANCE ORDER |
| 1. Remove a guard of the engine and a reception pipe of the muffler. |
| 2. Remove an inlet collector from a head of cylinders. |
| 3. For this purpose remove a thermometer cable for the forced air, a vacuum hose from the backpressure valve and the lower part of an inlet collector. |
| 4. Unscrew an inlet collector from a head of cylinders and the holder and remove consolidations. |
| 5. Do not unscrew consolidation for the backpressure valve. |
|
Installation
| PERFORMANCE ORDER |
| 1. Screw an inlet collector on a head of cylinders with 25 N.' effort of m, replace all consolidations. |
| 2. Screw a support of the case of an oil filter and the returnable pipeline with 25 N.' effort of m. |
| 3. Establish a guard of the engine and a reception pipe of the muffler. |
|
