1. Disconnect a forward part of the driveshaft from a flange of the transmission and remove the shock-absorber. If necessary completely remove the driveshaft. |
2. Stop the conducted shaft. |
|
|
3. Twist a nut (the drawing at the left) and remove a flange (the drawing on the right). |
4. Take an epiploon from a transmission casing. |
5. Examine a flange on existence of damages, if necessary replace it. |
6. Clean an epiploon groove, a carving of a shaft and a nut. |
7. Grease a new epiploon with lubricant and establish it into place. |
8. Establish a driveshaft flange. |
9. Apply N15 10 181 sealant on a carving of a nut and tighten a nut. |