9.1.2. Gearbox oil
Before merging oil, warm up the engine. Oil will merge much quicker and there will be high probabilities that the garbage and a deposit will merge together with oil.
Oil discharge
| PERFORMANCE ORDER |
| 1. Lift and fix a forward part of the car. |
| 2. Carefully clean a surface around a cap of a jellied opening. Unscrew a cap and remove a sealing washer. |
|
3. Establish suitable capacity under a drain opening and unscrew a cap of a drain opening. |
| 4. Completely merge oil. Clean caps of drain and jellied openings. |
|
Filling
| PERFORMANCE ORDER |
| 1. Establish new laying on caps and tighten them till the necessary moment of an inhaling. Lower the car on the earth. |
| 2. Fill in gearbox oil of the necessary brand and check oil level. |
| 3. Pass small distance and again check oil level. |
|
Check
| PERFORMANCE ORDER |
| 1. Install the car on a viewing hole. |
| 2. If the engine just worked, muffle it and wait 5 minutes. |
| 3. Carefully clean a surface around a cap of a jellied opening. Unscrew a cap. |
| 4. Insert the wire bent at right angle into an opening. Level of oil has to be 9 mm below than edge of a jellied opening. |
| 5. If necessary add oil. |
|
