1.13. Lighting
System of ellipsoidal forward headlights
|
|
1. Passing beam
2. Driving beam |
| PERFORMANCE ORDER |
| 1. Remove a protective cover of a headlight |
|
|
2. Disconnect the socket from the lamp basis, take out a lamp clamp from a clip and turn it outside. |
|
|
3. Push out a lamp on the holder down and take out from the reflector case. |
|
4. Disconnect the holder from the lamp basis. |
|
System of xenon forward headlights
|
|
1. Passing beam
2. Driving beam |
| PERFORMANCE ORDER |
|
|
1. Push out a lamp on the holder down and take out from the reflector case. |
| |
2. Disconnect the holder from the lamp basis. |
|
Parking lamp
Forward index of turn
Fog lights
| PERFORMANCE ORDER |
|
|
1. Weaken screws on the panel near fog lights, using the screw-driver, and remove the panel. |
| 2. Remove the screw on outer side of a fog light, turn a headlight aside and remove it. |
|
|
3. Remove a protective cover behind, having turned it. |
| 4. Disconnect the holder from a lamp socle. |
|
5. Release a latch of a lamp and turn down. |
| 6. Remove a lamp from the holder. |
|
7. Insert a new lamp so that the ledge on the holder of a lamp entered dredging in a reflector. |
|
Stoplights, indexes of turn, backing lamps, back fog lamp
| PERFORMANCE ORDER |
| |
1. Press the holder's uvula in the middle of the block of lamps aside and remove the block of lamps. |
| |
2. Press uvulas of holders of the block of lamps to each other on the right and at the left and remove the block of lamps. |
| |
3. Press a clamp uvula on the block of lamps and remove the block of lamps. |
|
Lamp of illumination of registration plate
| PERFORMANCE ORDER |
|
|
1. Press a spring clamp on one party and take out the holder of lamps, having extended it down. |
| |
2. Press a uvula on the opposite side and open the lamp case. |
|
|
3. Turn out two screws in a reverse side of the handle of a door of a back. Take out a lamp. |
|
The lamp of illumination of salon (joining when opening a door)
Lamps for reading (back)
