14.6. Bulbs (internal lighting)
Prevention
When replacing bulbs try not to touch glass of bulbs by fingers.
Be accurate not to burn.
Use bulbs of the required power.
FORWARD BULBS OF ILLUMINATION OF SALON
Replacement
PERFORMANCE ORDER |
|
1. Remove the lens. |
|
2. Remove the corresponding bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
BACK BULBS OF ILLUMINATION OF SALON
Replacement
PERFORMANCE ORDER |
|
1. Remove a lamp from the finishing panel. |
|
2. Get a bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
BULB OF ILLUMINATION OF THE LUGGAGE CARRIER
Replacement
PERFORMANCE ORDER |
|
1. Remove a lamp from the finishing panel. |
|
2. Remove a bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
BULB OF ILLUMINATION OF THE GLOVE COMPARTMENT
Replacement
PERFORMANCE ORDER |
1. Get a lamp. |
2. Remove a bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
LIGHTING BULB ON THE DOOR
Replacement
PERFORMANCE ORDER |
|
1. Remove a lamp from a door. |
|
2. Remove the filter. |
|
3. Get a bulb. |
4. Installation is carried out to the sequences, the return to removal. |
|
BULBS OF ILLUMINATION OF THE INSTRUMENT GUARD
Bulbs of lighting are located in the center of an instrument guard, and alarm bulbs – in the lower part.
Replacement
PERFORMANCE ORDER |
1. Remove an instrument guard. |
|
2. Turn and get a cartridge with a bulb. Remove a bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
LIGHTING OF THE SWITCH OF HEADLIGHTS
Replacement
PERFORMANCE ORDER |
1. Remove the switch. |
2. Remove a cartridge from a reverse side of the switch. |
3. Installation is carried out to the sequences, the return to removal. |
|
BULB OF LIGHTING OF THE HOURS / DISPLAY
Replacement
PERFORMANCE ORDER |
1. Remove an instrument guard. |
|
2. Unscrew a cartridge with a bulb and remove a bulb. |
3. Installation is carried out to the sequences, the return to removal. |
|
BULBS OF LIGHTING OF THE PANEL OF ADJUSTMENT OF TEMPERATURE IN SALON
Replacement
PERFORMANCE ORDER |
1. Remove the adjustment panel. |
2. Remove the corresponding bulb from a reverse side of the panel. |
3. Installation is carried out to the sequences, the return to removal. |
|