ef5af8e6

14:24. Elements of system of airbags of safety

MODULE OF THE AIRBAG OF SAFETY OF THE DRIVER

Removal

PERFORMANCE ORDER
Models till 1996 of release
1. Deactivate the safety airbag module.
2. Turn off fixing screws, disconnect the socket of connection and remove the module.
Models since 1996 of release
3. Deactivate the safety airbag module.
4. Turn off fixing screws from a reverse side of a steering wheel.
5. Disconnect the connection socket.
6. Remove the safety airbag module.

Installation

Installation is carried out to the sequences, the return to removal.

MODULE OF THE AIRBAG OF SAFETY OF THE PASSENGER

Removal

PERFORMANCE ORDER
1. Deactivate the safety airbag module.
2. Remove a glove compartment.
3. Remove the finishing panel from the left end face of the dashboard.
4. Remove ventilating grates and the panel of finishing.
5. Remove the lower panel of finishing.
6. Turn off and remove a fixing bolt of a casing.
7. Remove a casing.
8. Turn off fixing bolts and get the module.
9. Disconnect the socket of connection and remove the module.

Installation

Installation is carried out to the sequences, the return to removal.

SIDE MODULE OF THE AIRBAG OF SAFETY

Removal

For performance of this operation it is recommended to address experts.

THE CONTACT MODULE OF THE AIRBAG OF SAFETY (ON THE STEERING COLUMN)

Removal

PERFORMANCE ORDER
1. Remove a steering wheel.
2. Remove casings of a steering column.
3. Remove a fixing plate and disconnect the connection socket.
4. Release fixing clips.
5. Remove the contact module.

Installation

PERFORMANCE ORDER
Installation is carried out to the sequences, the return to removal. For adjustment of the module press a latch from above of the module and rotate the central part of the module counterclockwise, yet you will not feel resistance. Then turn it back on 2,5 turns and combine adjusting tags (are specified by shooters).

ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Disconnect the connection socket, turn off fixing nuts and remove an electronic control unit.

Installation

Installation is carried out to the sequences, the return to removal.

SENSOR OF SIDE CRASH

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing of a forward door.
2. Remove a protective film.
3. Turn off fixing screws and remove the sensor.
4. Disconnect the connection socket.

Installation

PERFORMANCE ORDER
Installation is carried out to the sequences, the return to removal. Check that the membrane was reliably pasted and did not pass air.