13:22. Elements of system of the central lock
DOOR WIRE
Removal and installation
PERFORMANCE ORDER |
1. Remove the lock of the corresponding door. |
|
2. Turn off fixing screws (are specified by shooters). |
|
3. Disconnect draft (are specified by shooters) and remove the drive. |
4. Installation is carried out to the sequences, the return to removal. |
|
CONTROL UNIT
Removal
PERFORMANCE ORDER |
1. Remove the finishing panel on the right side under the dashboard. |
2. Disconnect the socket of connection of the block. |
3. Turn off fixing nuts and remove the block. |
|
Installation
Installation is carried out to the sequences, the return to removal.
TRUNK LID LOCK DRIVE
Removal
PERFORMANCE ORDER |
1. Remove the panel of finishing of a cover. |
|
2. Disconnect draft from the drive. |
|
3. Disconnect the connection socket, turn off fixing bolts. |
|
4. Remove the drive. |
|
Installation
Installation is carried out to the sequences, the return to removal.
DRIVE OF THE LOCK OF THE BACK DOOR
Removal
PERFORMANCE ORDER |
1. Remove the panel of finishing of a door. |
2. Disconnect draft from the lock. |
3. Turn off fixing bolts. |
4. Disconnect the socket of connection and remove the drive. |
|
Installation
Installation is carried out to the sequences, the return to removal.
DRIVE OF THE LOCK OF THE GATE OF THE FUEL TANK
Removal
PERFORMANCE ORDER |
1. Remove the finishing panel on the right side of a luggage carrier. |
|
2. Disconnect the socket of connection of the drive. |
|
3. Turn off two fixing bolts. |
|
4. Remove the drive and a fixing arm. |
|
Installation
PERFORMANCE ORDER |
1. Installation is carried out to the sequences, the return to removal. |
|
2. Check that draft passed through the plug in a body. |
|
3. Check that draft was connected to a lock plate of the gate. |
|