ef5af8e6

12:16. System of adjustment of height of a back suspension bracket

Check of system

PERFORMANCE ORDER
1. Install the car on a plain surface and start the engine.
2. Measure height of a back suspension bracket.
3. Put heavy freight in a luggage carrier and check that within about 20 seconds height of a suspension bracket returned to initial value – 3–5 cm.
4. Remove freight and check that height of a suspension bracket returned to initial value.

COMPRESSOR

Removal

PERFORMANCE ORDER
1. Remove an insert of a wheel niche of the right forward wheel.
2. Disconnect the socket of connection of the compressor.
3. Disconnect hoses, turn off fixing screws and remove the compressor.

Installation

Installation is carried out to the sequences, the return to removal.

CONNECTING TUBE

Removal

PERFORMANCE ORDER
1. Disconnect a tube from the compressor and from valves on shock-absorbers.
2. Disconnect a tube from a tee.
3. Get a tube from fixing clips and remove it from the car.

Installation

Installation is carried out to the sequences, the return to removal.

SENSOR OF HEIGHT OF THE BACK SUSPENSION BRACKET

Removal

PERFORMANCE ORDER
1. Disconnect the socket of connection of the sensor.
2. Disconnect a connecting link from the spherical hinge on the sensor lever.
3. Turn off fixing screws and remove the sensor.

Installation

Installation is carried out to the sequences, the return to removal.