ef5af8e6

11:15. Vacuum amplifier

Check

PERFORMANCE ORDER
1. Squeeze out a brake pedal several times to remove depression from the vacuum amplifier.
2. Squeeze out a pedal of a brake and start the engine. The pedal has to fall a little.

Removal

PERFORMANCE ORDER
1. Squeeze out a brake pedal several times to remove depression from the vacuum amplifier.
2. Disconnect the connection socket from the sensor of level of brake fluid.
3. Turn off fixing nuts of the main brake cylinder and remove it from the vacuum amplifier.
4. Remove a connecting knee of a vacuum hose.
5. Disconnect a returnable spring from a brake pedal. Remove the switch of fires of a stoplight.
6. Remove a clip and get a pin, the fixing pusher of the vacuum amplifier to a brake pedal.
7. Turn off fixing nuts and remove the vacuum amplifier.

Installation

PERFORMANCE ORDER
1. Twirl a connecting fork on a pusher of the vacuum amplifier so that the distance between a surface of a fixing arm of the amplifier and an opening on a fork was 106,0±0,5 mm. Tighten a lock-nut.
2. Further installation is carried out to the sequences, the return to removal.