4.1. Technical characteristics
System type | |
All models | The cooling system is under pressure and includes a radiator with a cross stream, the water pump with the belt drive, perepuskny the thermostat and a broad tank. The main operated fan with one or with two additional fans. |
Thermostat | |
Begins to open |
92 °
|
It is completely open |
107 °
|
Cooling liquid | |
Type |
Cm. subsection 1.14
|
Volume |
Cm. subsection 2.1.1
|
Moments of an inhaling, N. of m.
All models | |
Compressor of the air conditioner: | |
– bolts of a forward arm |
35
|
– bolts of a back arm |
20
|
Connections of tubes of coolant of the air conditioner: | |
– the bolts fixing a tube to a flange in a dividing partition of a motive compartment |
20
|
– the bolts fixing a tube to the compressor (M10) |
40
|
– the bolts fixing a tube to the condensation camera |
20
|
– the bolts fixing a tube to the regulating gate |
9
|
– the bolts fixing a tube to a damper of pulsations |
27
|
– the bolts fixing a tube to a broad tank of the conditioner |
20
|
– the bolts fixing the conditioner switch with three provisions |
7
|
Pump of cooling liquid |
25
|
Bolts of a strut of a steering column: | |
– the bolts fixing a strut to a steering column |
22
|
– the bolts fixing a strut to a floor |
22
|
Four-cylinder models: | |
– the bolts fixing a tube of cooling liquid to a thermostat cover |
8
|
– bolts of the temperature sensor |
11
|
– thermostat casing cover |
15
|
Six-cylinder models: | |
– the bolts fixing a branch pipe of cooling liquid to a head of cylinders |
30
|
– the bolts fixing an inlet branch pipe to the block of cylinders |
20
|
– the bolts fixing an inlet branch pipe to a final collector |
6
|
– the bolts fixing a tube of cooling liquid to a head of cylinders |
25
|
– bolts of the block of the temperature sensor |
18
|
– thermostat casing cover bolts |
20
|