3.5.16. Flywheel
Prevention
At installation of a flywheel it is necessary to use new bolts.
Removal
PERFORMANCE ORDER |
1. Remove the transmission and coupling. |
|
2. Record a flywheel from a provorachivaniye, having established a clamp on a gear wreath of a flywheel. Apply combination tags on a flywheel and a bent shaft. |
|
3. Unscrew bolts and remove a flywheel. |
|
Check
Check a flywheel for wear from coupling and a condition of teeths of a gear wreath.
Installation
PERFORMANCE ORDER |
1. Clear the interfaced surfaces of a flywheel and a bent shaft. |
2. Establish a flywheel according to earlier made tags and screw in new bolts of fastening of a flywheel. |
3. Record a flywheel from a provorachivaniye and tighten bolts of fastening of a flywheel in several stages. |
4. Establish coupling and the transmission. |
|