Opel Omega B - the Repair manual and operation
1. Maintenance instruction
2. Maintenance
3. Repair of engines
3.1. SOHC engines of 2,0 liters
3.1.1. Technical characteristics
3.1.2. Check of a compression
3.1.3. Top Dead Point (TDP) of the N1 piston
3.1.4. Camshaft cover
3.1.5. Pulley of a bent shaft
3.1.6. Covers of a gas-distributing belt
3.1.7. Gas-distributing belt
3.1.8. Natyazhitel of a gas-distributing belt and asterisk
3.1.9. Camshaft epiploon
3.1.10. Casing of the camshaft and camshaft
3.1.11. Pushers and hydraulic elevators
3.1.12. Head of cylinders
3.1.13. Oil pallet
3.1.14. Oil pump
3.1.15. Flywheel
3.1.16. Epiploons of a bent shaft
3.1.17. Fastenings of the engine and transmission
3.2. DOHC engines of 2,0 liters
3.3. 2,5 and 3,0 liters engines
3.4. Partition of all petrol engines
3.5. 2,0 liters diesel engine
3.6. 2,5 liters diesel six-cylinder engine
4. Heating system and ventilation
5. Fuel, exhaust systems
6. System of start of the engine
7. System of ignition
8. Coupling
9. Transmissions
10. Main transfer, half shafts
11. Brake system
12. Suspension bracket and steering
13. Body
14. Body electric equipment
3.1.4. Camshaft cover
Removal
PERFORMANCE ORDER
1.
Disconnect a ventilating hose from a camshaft cover.
2.
Unscrew bolts and uncover the camshaft.
Installation
PERFORMANCE ORDER
1.
Carefully examine an internal surface of a cover and, if necessary, clean it.
2.
Establish new laying and establish a cover.
3.
Insert and tighten bolts.
4.
Connect a ventilating hose.