14.5. Bulbs (external lighting fixtures)
Prevention
When replacing bulbs try not to touch glass of bulbs by fingers.
Be accurate not to burn.
Use bulbs of the required power.
HEADLIGHTS OF HEAD LIGHT (BULBS OF PASSING BEAM)
Replacement of bulbs
| PERFORMANCE ORDER |
| Models with usual headlights |
|
1. Remove the top casing of a headlight. |
|
2. Remove a back casing of a headlight. |
|
3. Disconnect the connection socket. |
|
4. Remove a fixing clip. |
|
5. Remove a bulb. |
| 6. At installation of a new bulb use a scarf not to concern bulb glass. |
| 7. Installation is carried out to the sequences, the return to removal. |
| Models with xenon headlights |
| 8. Remove a casing from above of a headlight. |
| 9. Turn off fixing screws and remove a casing behind a headlight. |
| 10. Turn a cartridge with a bulb to the left and remove it. |
| 11. Turn a fixing ring to the left and remove it. |
| 12. Remove a bulb. |
| 13. Installation is carried out to the sequences, the return to removal. |
|
HEADLIGHTS OF HEAD LIGHT (BULBS OF DRIVING BEAM)
Replacement of bulbs
| PERFORMANCE ORDER |
| Models with usual headlights |
| 1. Remove casings from above and behind a headlight. |
|
2. Disconnect the connection socket. |
| 3. Press on a bulb and remove it. |
|
4. Installation is carried out to the sequences, the return to removal. |
| Models with xenon headlights |
| 5. See above. |
|
FRONT POSITION LAMPS
Replacement of bulbs
| PERFORMANCE ORDER |
| 1. Remove a casing behind a headlight. |
|
2. Get a cartridge with a bulb. |
|
3. Get a bulb from the boss. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
FORWARD INDEXES OF TURNS
Replacement of bulbs
| PERFORMANCE ORDER |
| 1. Remove a casing from above of a headlight. |
|
2. Turn a cartridge counterclockwise and get it. |
|
3. Press on a bulb, turn it and get from the boss. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
FORWARD FOG LAMPS
Replacement of bulbs
| PERFORMANCE ORDER |
|
1. Turn off fixing screws and remove a lattice near a lamp. |
|
2. Turn off fixing screws and get a lamp. |
|
3. Turn a cap and remove it from a lamp. |
|
4. Disconnect the connection socket. |
|
5. Release a fixing clip. |
|
6. Remove a bulb. |
| 7. Installation is carried out to the sequences, the return to removal. |
|
8. At installation of a lamp check that latches (are specified by shooters) got to grooves on a bumper. |
|
FORWARD SIDE INDEXES OF TURNS
Replacement of bulbs
| PERFORMANCE ORDER |
|
1. Remove a lamp from a forward wing by means of the small screw-driver. |
|
2. Turn and remove the lens. |
|
3. Get a bulb. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
BACK BLOCK HEADLIGHT (BACK WING)
Replacement of bulbs
| PERFORMANCE ORDER |
| 1. Remove the side panel of finishing of a luggage carrier. |
|
2. Wring out a latch and get a cartridge. |
|
3. Press on a bulb, turn and get it. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
BACK BLOCK HEADLIGHT (TRUNK LID)
Replacement of bulbs
| PERFORMANCE ORDER |
| 1. Open a trunk lid. |
|
2. Wring out latches and get a cartridge. |
|
3. Press on a bulb, turn and get it. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
BULBS OF ILLUMINATION OF BACK REGISTRATION PLATE (MODEL WITH THE BODY LIKE SEDAN)
Replacement
| PERFORMANCE ORDER |
|
1. Open a trunk lid, wring out a latch and remove a lamp. |
|
2. Remove the lens. |
|
3. Get a bulb. |
| 4. Installation is carried out to the sequences, the return to removal. |
|
BULBS OF ILLUMINATION OF BACK REGISTRATION PLATE (MODEL WITH THE BODY LIKE VERSATILE PERSON)
Replacement
| PERFORMANCE ORDER |
| 1. Open a back door, turn off fixing screws and remove a lamp. |
| 2. Remove a bulb. |
| 3. Installation is carried out to the sequences, the return to removal. |
|
THE TOP LAMP OF THE STOPLIGHT (MODEL WITH THE BODY LIKE SEDAN)
Replacement of bulbs
| PERFORMANCE ORDER |
|
1. Remove a lamp casing. |
|
2. Disconnect the connection socket. |
|
3. Remove the holder of bulbs from a casing. |
| 4. Remove a bulb. |
| 5. Installation is carried out to the sequences, the return to removal. |
|
THE TOP LAMP OF THE STOPLIGHT (MODEL WITH THE BODY LIKE VERSATILE PERSON)
Replacement of bulbs
| PERFORMANCE ORDER |
| 1. Remove the central section of the top panel of finishing of a back door. |
| 2. Get a cartridge and replace a bulb. |
|
