ef5af8e6

13:13. Internal panel of finishing of a door

FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove the regulator of provision of a rear-view mirror.
3. Remove a casing of the internal handle.
4. Remove the panel from the handle of closing of a door.
5. Remove caps.
6. Turn off fixing screws.
7. Remove the handle of closing of a door.
8. Remove the window regulator handle.
9. Remove a clip and remove the button of locking of a door.
10. Turn off the fixing screw.
11. Remove the panel of finishing of the button.
12. Remove caps.
13. Turn off the lower and forward fixing screws.
14. Remove the panel of finishing of a door.
15. If it is necessary, remove a protective film.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. On models with side safety cushions check that a protective film was it is densely pasted to a door and did not pass air.

BACK DOOR

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove an ashtray.
3. Remove the panel of the handle of opening of a door.
4. Remove the panel from the handle of closing of a door.
5. Remove a fixing clip of the button of locking of a door.
6. Remove the button of locking of a door.
7. Turn off the fixing screw of the panel of finishing.
8. Remove the finishing panel.
9. Turn off fixing screws of the handle of closing of a door.
10. Remove the handle of closing of a door.
11. Disconnect the socket of connection of a window regulator if it is necessary.
12. Remove the window regulator handle.
13. Remove a lamp of illumination of powder and disconnect the connection socket.
14. Turn off fixing screws of the panel of finishing.
15. Remove the finishing panel.
16. Disconnect the socket of connection of the loudspeaker.
17. Remove a protective film if it is necessary.

Installation

Installation is carried out to the sequences, the return to removal.