Opel Omega B - the Repair manual and operation
1. Maintenance instruction
2. Maintenance
3. Repair of engines
4. Heating system and ventilation
5. Fuel, exhaust systems
6. System of start of the engine
7. System of ignition
8. Coupling
9. Transmissions
10. Main transfer, half shafts
11. Brake system
12. Suspension bracket and steering
12.1. Technical characteristics
12.2. Rack of a forward suspension bracket
12.3. Disorder of forward wheels
12.4. Lower lever of a forward suspension bracket
12.5. Spherical hinge of the lower lever of a forward suspension bracket
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Connecting links of the stabilizer of cross stability
12.8. Rotary pin
12.9. Nave and bearings of a forward wheel
12:10. Cross-piece of a forward suspension bracket
12:11. Shock-absorber of a back suspension bracket
12:12. Lever of a back suspension bracket
12:13. Springs of a back suspension bracket
12:14. Stabilizer of cross stability of a back suspension bracket
12:15. Cross drafts of a back suspension bracket
12:16. System of adjustment of height of a back suspension bracket
12:17. Back suspension bracket
12:18. Cross-piece of a back suspension bracket
12:19. Fastenings of a cross-piece of a back suspension bracket
12:20. Nave and bearings of a back wheel
12:21. Steering wheel
12:22. Steering column
12:23. Lock of a steering column / lock of ignition
12:24. Steering mechanism
12:25. Steering drafts
12:26. Steering bipod
12:27. Pump of system of the hydraulic booster of steering
12:28. Adjustment of wheels and angles of turns
13. Body
14. Body electric equipment
12.4. Lower lever of a forward suspension bracket
Removal
PERFORMANCE ORDER
1.
Remove the corresponding forward wheel.
2.
Turn off a coupling bolt and lower the suspension bracket lever down, having disconnected the spherical hinge from a rotary pin.
3.
Turn off fixing bolts and remove the suspension bracket lever from the car.
4.
Check a condition of plugs of fastenings and replace them if it is necessary.
Installation
PERFORMANCE ORDER
1.
Install the suspension bracket lever into place and acquire fixing bolts.
2.
Install the lever horizontally and put the fixing clamps and bolts till the required inhaling moment.
3.
Further installation is carried out to the sequences, the return to removal.