12:20. Nave and bearings of a back wheel


1. Turn off a fixing nut of a half shaft and get a half shaft from a nave.
2. Remove a brake support.
3. Turn off a bolt of the lower fastening of the shock-absorber to the suspension bracket lever.
4. Remove a brake guard.
5. Twirl bolts of fastening of a wheel into place and, holding a nave by means of a lomik, turn off the central nut of fastening of a nave.
6. Remove a half shaft flange by means of a stripper.
7. Remove a nave and the bearing by means of a stripper.


Installation is carried out to the sequences, the return to removal.