12:17. Back suspension bracket


1. Remove intermediate and back sections of the exhaust system.
2. Remove the balance weight of ropes of the emergency brake.
3. Remove supports of brakes.
4. Remove ABS sensors.
5. Disconnect the driveshaft from a flange of the main transfer.
6. Establish a thick board under levers of a suspension bracket and establish a jack under the center of a board.
7. Turn off bolts, the fixing arms of the main transfer to a body.
8. Turn off bolts of the lower fastenings of shock-absorbers.
9. Remove springs of a suspension bracket and laying.
10. Turn off three fixing bolts (A) and the central bolt (V) of forward fastening of a cross-piece of a suspension bracket and remove a back suspension bracket.


Installation is carried out to the sequences, the return to removal.