12:13. Springs of a back suspension bracket


1. Lower a back part of the exhaust system approximately by 300 mm.
2. Disconnect the socket of connection of the sensor of height of a back suspension bracket. Mark position of the lever of the sensor and disconnect it from connecting draft of the stabilizer of cross stability.
3. Disconnect a hydraulic tube from the shock-absorber if it is necessary.
4. Turn off and remove bolts of the lower fastening of the shock-absorber.
5. Disconnect sockets of connection of ABS sensors.
6. Turn off the bolts fixing a damping arm of a cross-piece of a back suspension bracket to a body.
7. Omit the main transfer, a cross-piece of a back suspension bracket and the lever of a suspension bracket and remove a spring and rubber laying.


Installation is carried out to the sequences, the return to removal.