12:12. Lever of a back suspension bracket
Removal
PERFORMANCE ORDER |
1. Get a half shaft from a nave of a back wheel. |
2. Remove a support of a brake and a brake disk. |
3. Remove a rope of the emergency brake from the lever. |
4. Disconnect the socket of connection of the sensor of height of a back suspension bracket. Mark position of the lever of the sensor and disconnect it from connecting draft of the stabilizer of cross stability. |
5. Remove a nave of a back wheel and a guard of a brake. |
6. Disconnect draft from the suspension bracket lever. |
7. Lower a back part of the exhaust system. |
8. Disconnect connecting draft of the stabilizer of cross stability from the suspension bracket lever. |
9. Remove a suspension bracket spring. |
10. Establish a support under differential. Remove the central bearing of the driveshaft from the body bottom. |
11. Turn off forward fixing bolts of a cross-piece of a back suspension bracket and lower a cross-piece together with differential a little. |
12. Turn off hinged bolts and remove the suspension bracket lever. Replace plugs if it is necessary. |
|
Installation
Installation is carried out to the sequences, the return to removal.