12:11. Shock-absorber of a back suspension bracket


1. Lift the corresponding lever of a back suspension bracket to reduce load of the shock-absorber.
2. Remove a carpet or the panel of finishing and turn off nuts of the top fastening of the shock-absorber.
3. On models with the adjustable height of a back suspension bracket open the valve sideways of the shock-absorber and release pressure. Disconnect a hydraulic tube from the shock-absorber.
4. Lower the suspension bracket lever, turn off the lower fixing bolt.
5. Remove the shock-absorber.
6. Examine the shock-absorber on existence of wear or damages.
7. Check rubber elements of fastenings.
8. Replace the failed elements.
9. Check operation of the shock-absorber and replace it if it is necessary.


Installation is carried out to the sequences, the return to removal.