12:10. Cross-piece of a forward suspension bracket


1. Remove the protective panel from below of the engine.
2. Disconnect spherical hinges of levers of a suspension bracket from rotary pins.
3. Disconnect connecting links from the stabilizer of cross stability.
4. Turn off nuts, the fixing both fastenings of the engine to a cross-piece and fixing arms.
5. Remove a damper of vibration of the engine if it is necessary.
6. Install the elevator from above of the engine and pull the elevator winch that it accepted engine weight.
7. Mark the provision of installation of a cross-piece of a forward suspension bracket.
8. Turn off fixing bolts and remove a cross-piece.


Installation is carried out to the sequences, the return to removal.