10.9. Driveshaft
Removal
PERFORMANCE ORDER |
|
1. Remove heat-shielding screens of catalytic converters. |
|
2. Turn off the bolts (are specified by shooters) fixing the driveshaft to a transmission flange. |
|
3. Turn off the bolts (are specified by shooters) fixing the driveshaft to a differential flange. |
|
3. Turn off fixing bolts of an intermediate support (are specified by shooters) and remove the driveshaft. |
|
Installation
Installation is carried out to the sequences, the return to removal.
CENTRAL BEARING OF THE DRIVESHAFT
Replacement
PERFORMANCE ORDER |
1. Remove the driveshaft. |
2. Mark an arrangement of sections of the driveshaft and disconnect forward section. |
|
3. Remove a cover, a lock ring and a washer. |
4. Remove a bearing casing from a fixing arm. |
5. Squeeze out the old bearing and a napressuyta new. |
|
6. Assembly is carried out upside-down. For the correct installation of forward section of the driveshaft serves directing vents (it is specified by an arrow). |
|
FLEXIBLE CONNECTING DISKS OF THE DRIVESHAFT
Replacement
PERFORMANCE ORDER |
1. Disconnect a half shaft from a flange of the transmission or differential. |
2. Take a shaft aside and remove the corresponding disk, having picked up it the screw-driver if it is necessary. |
3. Installation is carried out to the sequences, the return to removal. |
|